Tủ AC/DC 220VDC-30A
Tủ Chỉnh lưu 220VDC
Tủ cấp nguồn 1 chiều 220VDC
Tủ sạc PMI - Battery Charger 220VDC-30A
Model: RDAT22030
Hãng sản xuất: PMI
Xuất xứ: Thổ Nhĩ Kỳ
Loại 1 pha đầu vào
Với lợi thế là đại diện phân phối độc quyền tủ sạc ắc quy của hãng, đến với chúng tôi quý khách hàng sẽ được hưởng các sản phẩm và dịch vụ tốt nhất:
1. Giá cạnh tranh nhất (Không qua trung gian)
2. Đầy đủ Giấy tờ nhập khẩu: CO, CQ, Hướng dẫn sử dụng.
3. Chế độ hộ trợ lắp đạt vận hành và bảo hành bảo trì chính hãng.
4. Được ủy quyền và bảo vệ đối với các dự án đã sử dụng thiết bị từ đầu.
Sản phẩm xuất xứ Châu Âu!
 |
| Tủ sạc acquy 220VDC-30A |
Thông số kỹ thuật tủ sạc acquy 220VDC
GENERAL
|
||
Model
|
Monophase Input
|
|
Topology
|
6 Pulse Thyristor controlled
AC/DC Rectifier with input isolation transformer
Optional 12 Pulse Thyristor controlled AC/DC Rectifier with input isolation transformer |
|
INPUT
|
||
Nominal Voltage
|
110 VAC /
115VAC /208 VAC / 220 VAC / 230
VAC / 240 VAC ±15%
|
|
Nominal Frequency
|
50 / 60 Hz ±5%
|
|
Power Factor
|
>0.8 Inductive (>0.9 with
12 Pulse Rectifier)
|
|
Transformer
|
Galvanically isolated
|
|
ITHD
|
<30% (standard); <10% (with 12
Pulse Rectifier)
|
|
Input Protection
|
Thermic-Magnetic Over Current
Protection, Over Voltage Protection, Phase Sequence
Free Operation (3 Phase), Soft Start |
|
OUTPUT
|
||
Floating Output Voltage
|
12/24 VDC±1% / 48 VDC±1% / 110 VDC±1% /
220 VDC ±1%
|
|
Output Voltage Adjust-
ment |
12/24VDC output: 10VDC to 30VDC,
48VDC output: 48VDC to 60VDC, 110VDC output:
110VDC to 160VDC, 220VDC output: 220VDC to 300VDC |
|
Output Current Adjust-
ment |
0-100% of Nominal Output Current
|
|
Battery Charge Current
Adjustment |
0-100% of Nominal Output Current
|
|
Boost Charge Voltage
|
100% to 120% of Floating Output Voltage
|
|
Boost voltage (V/C)
|
2,4 lead acid battery 1,60 NiCd Battery
|
|
Float voltage (V/C)
|
2,23 lead acid battery 1,40 NiCd
battery
|
|
Nominal Output Current
|
Available upto 1200 Amp (12 Pulse over
400 Amp)
|
|
Maximum Output Cur-
rent |
100% of nominal output current
|
|
Output Ripple
|
1% RMS AC of Output Voltage
|
|
Dynamic Response (w/
out battery group) |
±5% of Output Voltage (25% load change
at 50% load)
|
|
Dynamic Response (with
battery group) |
±2% of Output Voltage (100% load
change)
|
|
Battery Charging Prin-
ciple |
Constant Current/ Constant Voltage
|
|
Output Protection
|
Short Circuit Protection, Over
Voltage Protection, Reverse Voltage Protection
Short Circuit, Overvoltage protection, MCB and Phase Sequence Protection |
|
Battery Protection
|
L-C filters, Overcurrent Electronic
protection,Over Voltage Protection and Thermic Fuse
|
|
GENERAL
|
||
Boost Timer
|
0 - 99.9 hours adjustable
|
|
Cooling
|
Forced fans with smart fan controlling
system
|
|
Isolation Voltage
|
2500VAC input/chassis and
output/chassis
|
|
Efficiency at full load
|
>90%
|
>92%
|
MTBF
|
100,000 Hrs. (w/out battery group)
|
|
Operating Temperature
|
-10 / + 40 °C
|
|
Protection Level
|
IP20 (Standard); IP54 (Optional)
|
|
Enclosure Material
|
Mild Steel, Zinc-phosphate coated;
100 electrostatic paint; 1.5 mm
thickness
|
|
Cable Entry
|
Front Botttom
|
Access to Batteries
|
Batteries and rectifier in the same
cabinet with front access (optional)
|
Relative Humidity
|
5% to 90% non condensing
|
Circuit Breakers
|
Thermic - magnetic circuit
breakers for Input, Battery and Load
( up to 100A) |
Silicon Dropper
|
Available on request (For load output)
|
Reset Button
|
Used for re-operation in case of
failure of the system. (Without disconnecting the load
from battery group) |
Boost inhibit
|
Interlock application inhibits
one of the rectifiers for boost operation in
parallel redun-
dant mode |
DISPLAY
PANEL
|
|
Front Panel Measured
Values |
LCD Display for Load Output
Voltage / Current , Battery Output Voltage / Current and
Line Voltage / Line Current / Frequency |
Front Panel Indicators
|
Float mode, Boost mode, Current
mode, Boost inhibit, Battery ending, Low battery, Bat-
tery test failure, Line failure, Fan failure, Over voltage, Under voltage, Over temperature, Rectifier failure, SCR fuse failure (LED indication), Line MCB (LED indication), Load MCB (LED indication), Battery MCB (LED indication) |
Front Panel Set Menu
|
Boost charge voltage, Float charge
voltage, Low battery voltage , Battery test , Charger
output current, Battery charge current, Battery automatic boost current and float current, Auto & Manual boost selection, Manual boost time, LED test and On - OFF. |
Event History
|
Last 250 events recorded and displayed
on front panel and on PC via RS 485
|
Time and Date
|
Adjustable
|
ALARM
CONTACTS
|
|
Charger Failure
|
Open or closed free contacts
|
Low Battery
|
Open or closed free contacts
|
Rectifier over voltage
|
Open or closed free contacts
|
Over temperature
|
Open or closed free contacts
|
Line Failure
|
Open or closed free contacts
|
Load MCB
|
Open or closed free contacts
|
Battery MCB
|
Open or closed free contacts
|
Line MCB
|
Open or closed free contacts
|
ENVIRONMENT
|
|
Operating Temperature
|
-10 / +40 0C
|
Relative Humidity
|
5 - 90 %
|
Operating Altitude
|
Max. 2000 Mt.
|
Noise Level
|
Max. 60 db
|
Electrical Standards
|
EN 50091-1 (Security) / EN 50091-2
(EMC)
|
COMMUNICATION
& PARALLELING
|
|
Communication
|
RS 232 / RS 485 - Timer Setting,
Boost Voltage Setting, Float Voltage Setting ,Output cur-
rent setting, battery current setting , automatic boost setting and Reset buttons. |
Paralleling
|
N+1 Parallel Redundant (No need for
extra kit for paralleling)
|
Quý khách vui lòng để lại thông tin để nhận catalogue và báo giá: lamnhatninh@gmail.com
Hotline: 0912277112 - Mr Ninh
Cám ơn quý khách đã quan tâm sản phẩm của chúng tôi cung cấp.
